EPEVER PHOTO VOLTAIC CHARGE CONTROLLER SETUP: TRACER AN COLLECTION CONTROLLE

EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE

EPEVER Photo voltaic CHARGE CONTROLLER SETUP: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Collection Photo voltaic Cost Controller is a remarkably productive solar controller suitable for off-grid solar units. Based upon multiphase synchronous rectification know-how, it assures optimized energy conversion and process stability for a wide array of photovoltaic (PV) applications.

Essential Attributes with the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Solar Cost Controller technologies for remarkable photo voltaic Power harvesting. Critical attributes include things like:

Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Advanced MPPT Algorithm with >99% performance.
Twin-Phase Charging for enhanced battery lifetime.
LCD Screen with true-time info checking.
Multiple Load Management Modes which includes manual and timer.
In depth Digital Protections towards overcharging, more than-discharging, quick circuits, and reverse polarity.
Step-by-Action Information to Putting together the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all components are included: Tracer AN device, temperature sensor, communication cables, and consumer guide.
Verify the product variety and voltage ratings match your photo voltaic panel and battery specs.
two. Mounting the Cost Controller
Pick a well-ventilated, dry location near the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Keep suitable clearance for warmth dissipation.
three. Wiring the Photo voltaic Charge Controller
Warning: Normally observe right basic safety protocols and ensure the technique is powered off in advance of connecting components.

Step one: Connect the battery terminals into the cost controller (positive to constructive, negative to adverse).
Move 2: Join the solar panel array to the PV input terminals.
Action 3: Hook up the load terminals if using a direct load link.
Phase 4: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Options
Electrical power to the controller by connecting the battery to start with.
Utilize the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, gentle Manage.
5. Checking and Info Logging
The Tracer AN Series supports serious-time monitoring using the MT50 remote meter.
Knowledge can be logged through the RS485 conversation port using software package such as Solar Station Laptop.
Distant checking is possible Along with the EPEVER WiFi module.
six. Troubleshooting Prevalent Issues
Concern one: No Electrical power Output

Look at battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Concern two: More info Above-Voltage Defense

Validate the photo voltaic array’s voltage ranking.
Adjust method parameters if necessary.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Ensure MPPT configurations inside the menu.
Advantages of the Tracer AN Sequence with MSR Know-how
The multiphase synchronous rectification engineering ensures:

Greater Effectiveness: Minimized Electricity losses all through conversion.
Enhanced Reliability: Steady performance beneath variable loads.
More time Battery Life: Steady and exact charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification technology is undoubtedly an Remarkable choice for optimizing solar power technology and increasing battery life. By pursuing the above mentioned setup tutorial, consumers can ensure highest performance and system longevity.

Report this page