EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is usually a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Depending on multiphase synchronous rectification technology, it guarantees optimized Electricity conversion and procedure balance for a wide array of photovoltaic (PV) purposes.
Key Capabilities on the EPEVER Tracer AN Series Controller
The Tracer AN sequence makes use of EPEVER Solar Demand Controller technology for top-quality solar Electrical power harvesting. Crucial characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
State-of-the-art MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with true-time knowledge monitoring.
Numerous Load Management Modes like guide and timer.
Thorough Electronic Protections against overcharging, over-discharging, brief circuits, and reverse polarity.
Stage-by-Stage Manual to Establishing the EPEVER Tracer AN Sequence Controller
one. Unboxing and Planning the Controller
Guarantee all elements are involved: Tracer AN unit, temperature sensor, conversation cables, and user manual.
Validate the model range and voltage rankings match your photo voltaic panel and battery specifications.
two. Mounting the Cost Controller
Pick a effectively-ventilated, dry area close to the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Maintain proper clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Normally observe good protection protocols and ensure the program is driven off prior to connecting elements.
Stage 1: Join the battery terminals into the demand controller (beneficial to beneficial, detrimental to detrimental).
Move 2: Link the solar panel array to the PV input terminals.
Phase 3: Hook up the load terminals if using a direct load link.
Action 4: Double-check all connections for polarity and tightness.
4. Configuring the Controller Settings
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Screen to navigate the settings menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Management.
5. Monitoring and Information Logging
The Tracer AN Collection supports actual-time monitoring using the MT50 distant meter.
Facts could be logged by way of the RS485 communication port working with application such as Solar Station PC.
Remote checking is feasible with the EPEVER WiFi module.
6. Troubleshooting Widespread Issues
Situation one: No Electrical power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation two: Over-Voltage Security
Confirm the photo voltaic array’s voltage rating.
Adjust procedure parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT options within the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification technologies ensures:
Increased Performance: Lowered Electrical power losses in the course of conversion.
Improved Dependability: Steady efficiency beneath variable masses.
More time Battery Everyday living: Dependable and correct charging profiles.
Conclusion
The EPEVER Solar Demand Controller with multiphase synchronous rectification technology is definitely an Fantastic choice for optimizing solar energy technology and extending battery existence. By pursuing the above mentioned set up More info manual, consumers can be certain maximum efficiency and program longevity.